VT7138-3

-- English --
- License plate: N/A
VREDO VT 7138-3 With Vogelsang SwingMax 36m
Year 2021
Hours: 5800
Machine nr. 0113.004

VT7138-3 PREPARED FOR ZBV 32000Z
Specification:
Engine Scania DC16 317A V8, 522 kW / 710 hp water cooled
EU Stage 5 with SCR (AdBlue) and DPF
Max. Torque 3320 Nm@ 1400 rpm
Transmission: Vredo VVT700 CVT stepless transmission
Two forward speed ranges, 0-20 kph and 0-40 kph
Reverse speed 0-17 kph
Fuel tank capacity 845 Litres
AdBlue tank capacity 69 Litres
Full air suspended Comfort Claas cab, incl. radio/CD player
with Bluetooth (with external microphone for phone calls)
Fully automatic climate control
Operational console in RH armrest, fitted on seat, incl. Drive-
and Slurry system, Joy-Stick and Touchscreen-Terminal
All machine and slurrysystem data on Hydac touchscreen
terminal
Air suspended Grammer Maximo Super-Comfort seat
Passenger seat
Electrical adjustable and heated mirrors, incl. wide angle mirror
Efficient drivertrain through Ecomode
Cruise control with anti-stall control
Continuously all wheel drive with lockable length differential for
front axle and tandem rear axles
Front and rear axles with lockable cross differential, pressure
operated switch in cabin
Steering: 6-wheel and Crab steer (Tandem wheels partly crab
steer)
Tyres Mitas 900/60 R42 SFT CHO 192 A8
Hydraulic suspended front axle with automatic levelling and
pendule absorption
Tandem rear axles with mechanical penduling
3-Point, CAT 3 dimensions, double working hitch at rear,
slewed with crab steer, torsion suspended CAT 4 quick
couplers for toolbar suspension. Active controlled automatic
ground adaption with pressure or free ground following or
floating
Lift height 660mm, max height ca. 1m with 900-tires
Lift capacity in Balls max. 105kN (10.5 ton) through 75 kN (7,5
ton)
Manual control of 3-point hitch at rear fender of the machine
Automatic greasing system with 4L grease reservoir
1 Pump for closed loop system max 267 l/min, 420 bar.
Slurrypump drive gear
2 LS-Pumps, 170 l/min each, at 200 bar, for external spool
valves and internal functions such as suspension, steering, 3-
point hitch, cooling, etc.
4 Double/Single rear hydraulic spool valves, operated from
cabin
Standard pressure free return line 3/4"
Reversing alarm
Rear camera and LCD-colour monitor with speaker in cabin
Connection for second camera at the rear of the Trac
Telescopic cylinder for tipping slurry tank from chassis
2 Rotating beacons on cabin
LED headlights in front bumper
2 LED work lights behind cabin
2 LED work lights under the cabin
4 LED work lights in cabin roof
Compressed air system for cleaning cabin and cooling unit
Quick coupling for air at the rear of the Trac
Fire extinguisher, 5 kg
Vredo Trac is delivered as standard with emergency support kit,
set contains most important fuses, sensors, plugs and o-rings
Vredo Trac is delivered as standard with 2 year Remote
Teleservice License (Vredo Service is able to login on machine
for trouble shooting). After two years the customer could decide
to buy a new license.

TPIS 7138-3 MOTOR COMP.
Tyre pressure inflation system by motor compressor 850 ltr/min by 4
bar and 1500 rpm

System for standard 900 tyres with 3,0 m outside dimension
Pipelines mounted at the outside of the tyres, removable for
transport
Including control from cabin
2 different settings on display for driving in the field or on the
road
The actual pressure values can be seen on the touchscreen
terminal, pressure front and rear axles displayed separately

OPTION TUV VT 7138-3
Modifications in order to "Deutschen Rechtsvorschriften fur
Strassentransport"
Emergency steering with electrical hydraulic pump
Warning signs in the front and rear of machine
License-plate holder at the rear of machine
Indication of max. speed
Wheel chocks
Tuv approval 40 kmh with certificate

Attention: Only applicable for Germany

SUPPORT AXLE VT7138-3
Support axle for VT7138-3
Required for the German road approval in case a wide ≥ 30m)
dribble bar-or trailing shoe implement is mounted, and front
axle weight is over 11,5 ton
Increased permitted total weight

EXTRA OPERATION LIGHTKIT FENDERS
2 additional LED working lights on fenders behind cabine\
OPTION VT7138 TRIMBLE GPS TMX/RTK
Trimble Autopilot RTK with TMX 2050 terminal
TMX 2050 Display with Precision IQ software
AG25 GNSS Antenna mounted above 3 point hitch swivel point
Complete integrated in steeringsystem Trac
Crab-steer functionality
The Trimble has standard the Glonass and GPS satellites
Standard EGNOS signal 0-30 cm precision (absolute 0-2 mtr.)
Precision with RTK correction signal 0-2 cm (absolute 0-2,5 cm)
Excl. RTK correction signal license
System is prepared for correction signal via a SIM-card modem
RTK agreement from supplier (Trimble) to discuss together with
customer
Complete installed and tested
OPTION WINDSCREEN WIPERS ON CAB
Windscreen wipers are mounted on the left and right door of
the cabin
Switches for operation are mounted in cabin roof

TANK VT7138-3 ZBV 32000Zs FLEXTANK
The tank ZBV 32000Zs is equipped with the following as standard:
Construction of gel-coated glass-fiber polyester with 5 slosh
baffles
Tank volume 25 m3, with top slurry bag (7 m3) till 32m3
Tank hydraulically tippable
Tank easy to demount because of fitment on Twist-Locks
Tank with open aeration/de-aeration
Automatic switch of pump at loading or unloading
Mechanical level gauge and electronically displayed
Load volume to be pre-set at terminal
8" 3-Way valve at rear of tank for load, unload and recirculating
LED Worklights at rear of tank
Rotating beacon and camera on backside of tank
1 inspection hatch on backside of the tank

ZBV 32000Zs PREP. VOGELS. SWINGMAX
Brackets and transportsupports on tanksides
Extended CAT 4 quick-connect hooks
4-point connection on back of tank with stable framework
Crab steering possible for Trac, not for implement
Slurry distribution box with 2x 6" quick coupling
Electro / hydraulic modification
Software modification

EXTRA OPERATION LIGHTKIT ON TANK
2 additional LED working lights on back of tank beside to
standard working lights on tank
Assembled 1x on leftside and 1x on rightside of tank

PUMP FILTER UNIT PF12000
Specification:
Complete unit mounted at front of chassis
Vogelsang positive displacement pump VX186-520QD 12.000
ltr/min with hydrostatic drive
Vogelsang pump equipped with axial wear plates
Vredo slicing filter FT 6200 with hardened steel interior and
emptying device to be operated from cabin
10" DN250 front arm slewable 135 degrees
Return turning provision of the slurry pump
Loading of tank at reduced variable engine speed
Electro-hydraulic operation by multi-grip joy-stick
Configuration of slurry system parameters on terminal
6" reload connection in front of PF-unit
Reloadarm automation
LED headlights in front bumper
Bumper standard equipped with extra (flexible) step

Always with one of the following options:
1932OOOO101-01

TELESC. RELOAD DOCKING ARM PF12000
10" telescopic reload docking arm 1,6 m extendible. Till ca. 7,2m
measured from the front axle at a height of 4m

With 10" docking ball
2 hydraulic cylinders to adjust length of docking arm
Air operated sealing
4" aeration valve

OPTION CENTRIFUGAL PUMP IN PF12010
Centrifugal pump in the upper section on standard docking
reloadarm:
For more reload capacity up to 16.000 ltr/min
Hydrostatic driven by a seperate hydropump, till 200 hp power
possible
Aeration valve
Works together with positive displacement in pump by-pass

-- Deutsch --
- Nummernschild: N/A
VREDO VT7138-3 mit Vogelsang SwingMax 36m
Baujahr 2021
Stunden: 5800
Machinen nr. 0113.004

Technische Daten:
Motor: Scania DC16317A V8, 522kW / 710PS, wassergekuhlt
Abgasnorm: EU Stage5 mit SCR (AdBlue) und DPF
Max. Drehmoment: 3320Nm bei 1400U/min
Getriebe: Vredo VVT700 CVT stufenlos
*Vorwartsgange: 0-20km/h und 0-40km/h
*Ruckwartsgang: 0-17km/h
Tankinhalt Diesel: 845Liter
AdBlue-Tank: 69Liter
Fahrerkabine: Luftgefedert (Comfort Claas-Kabine), Radio/CD mit Bluetooth & externem Mikrophon
Klimatisierung: Vollautomatische Klimaanlage
Bedienkonsole: Rechts am Sitz - Fahr- & Schleppschlauchsystem, Joystick, Touchscreen-Terminal
Anzeige: Alle Maschinen- & Gulledaten uber Hydac-Touchscreen
Sitze: Luftgefederter Grammer Maximo Super-Comfort + Beifahrersitz
Spiegel: Elektrisch verstell- und beheizbar, inkl. Weitwinkelspiegel
Antriebsoptimierung: EcoMode
Tempomat: Mit Abwurg-Schutz
Antrieb: Permanenter Allrad, sperrbares Langs- & Querdifferential vorn & hinten, elektrisch schaltbar
Lenkung: 6RadLenkung + Krabbenlenkung (Tandemrader teilweise krabbend)
Bereifung: Mitas 900/60 R42 SFT CHO 192 A8
Achsenaufhangung:
*Vorderachse: Hydraulisch gefedert mit automatischer Nivellierung
*Hinterachse: Tandem mit mechanischer Pendelaufhangung
Hubwerk: 3Punkt Kat. 3, Doppel-Hubwerk, 660mm Hub (max. ~1m mit 900er Reifen), Tragkraft 75-105kN, Krabbenlenkung, aktive Bodenkonturanpassung
Schmierung: Automatische Zentralfettung (4L)
Hydraulik:
*1 ClosedLoopPumpe: 267L/min bei 420bar
*Gullepumpen-Antrieb
*2 LS-Pumpen: 170L/min bei 200bar fur interne/externe Funktionen
Zapfventile: 4 hinten Rucklaufleitung drucklos (¾″)
Sicherheitsausstattung:
*Ruckfahralarm, Ruckfahrkamera + Monitor
*Anschluss fur zweite Ruckfahrkamera
*Teleskopzylinder zum Gulletank-Kippen
*2 Rundumleuchten, LED-Scheinwerfer vorne, diverse LED-Arbeitsscheinwerfer
*Druckluftsystem, Anschluss hinten
*5kg Feuerloscher
*Notfall-Support-Kit (Sicherungen, Sensoren etc.)
*2 Jahre Remote-Teleservice-Lizenz (Fernwartung)

TPIS 71383 - REIFENLUFTSYSTEM
Motor-Kompressor: 850L/min bei 4bar (1500U/min)
Fur 900er Reifen (O 3,0m)
Luftleitungen aussen, abnehmbar furs Transport
Steuerung & Druckanzeige uber Kabinen-Touchscreen (Feld-/Strassenmodus)

OPTION TUV VT71383 (nur DE)
Anpassung gemass deutscher Strassenvorschriften
Notlenkung mit elektro-hydraulischer Pumpe
Warnschilder vorne/hinten, Kennzeichenhalter, Geschwindigkeitsanzeige, Unterlegkeile
TUV-Zulassung 40km/h, inkl. Zertifikat

STUTZACHSE VT71383 (DE-Zulassung bei Geraten ≥30m)
Erhohte Achslast vorne (>11,5t), hohere Gesamtzuladung

EXTRALICHTKIT - KOTFLUGEL
2 zusatzliche LED-Arbeitsscheinwerfer an den Kotflugeln hinter der Kabine

OPTION TRIMBLE GPS TMX/RTK
Trimble Autopilot RTK mit TMX 2050 Terminal & GNSS-Antenne
Vollintegriert in Lenkung, inkl. Krabbenlenkung
Prazision: EGNOS 0,3m - RTK 0,02m (RTK-Lizenz optional)
Vorbereitung fur Mobilfunk-Modem

OPTION SCHEIBENWISCHER AN DER KABINE
Wischer an beiden Turen, Schalter im Dachbereich

TANK VT71383 - ZBV32000Zs FLEXTANK
GFK-Tank mit Gelcoat, 5 Baffeln, 25m3 (max. 32m3 mit Aufsatz)
Hydraulisch kippbar, abnehmbar via Twist-Locks
Offene Beluftung, Pumpenumschaltung auto, mechanische & digitale Fullstandsanzeige
8″ 3-Wege-Ventil, LED-Ruckleuchten, Ruckfahrkamera & Inspektionsoffnung
ZBV32000Zs - VOGELSANG SWINGMAX
Seitenhalterungen, verstarkte Kat4 Kupplung, Krabbenlenkung (nur fur Trac)
Schleppschlauch-Anschlussbox (2x6″), elektro-hydraulische Steuerung inkl. Software

EXTRALICHTKIT AM TANK
2 zusatzliche LED-Arbeitsscheinwerfer hinten links & rechts

PUMPEN-FILTERANLAGE PF12000
Frontmontiert am Chassis: Vogelsang VX186520QD Verdrangerpumpe (12000L/min hydrostatisch)
Vredo Filter FT6200, schwenkbar 135°, elektronisch uber Terminal gesteuert
6″ Umladeanschluss vorne, LED-Licht, flexible Trittstufe an der Stossstange

TELESKOPISCHER RELOAD-ARM PF12000
10″ teleskopierbarer Arm (1,6m bis 7,2m), hydraulisch langenverstellbar, luftdicht

OPTION ZENTRIFUGALPUMPE IN PF12010
Zentrifugalpumpe oberhalb des Standardarms - bis 16000L/min, hydrostatisch bis 200PS
Arbeitet im Bypass zur Verdrangerpumpe
Varianten: 1932OOO00102

-- Nederlands --
- Kenteken: N/A
VREDO VT7138-3 met Vogelsang SwingMax 36m
Bouwjaar 2021
Draaiuren: 5800
Machinenummer: 0113.004

Specificaties:
Motor: Scania DC16 317A V8, 522 kW / 710 pk, watergekoeld
Emissienorm: EU Stage 5 met SCR (AdBlue) en DPF
Max. koppel: 3320 Nm @ 1400 t/min
Transmissie: Vredo VVT700 CVT traploze transmissie
2 rijbereiken: 0-20 km/u en 0-40 km/u
Achteruitrijsnelheid: 0-17 km/u
Brandstoftank: 845 liter
AdBlue-tank: 69 liter
Cabine: Geheel luchtgeveerde Claas Comfort cabine, incl. radio/CD-speler met Bluetooth en externe microfoon
Airco: Volautomatische klimaatregeling
Bediening: Bedieningsconsole in rechterarmleuning van de stoel met joystick en touchscreen-terminal voor rij- en mestfuncties
Display: Alle machine- en mestsysteemgegevens zichtbaar op Hydac touchscreen
Stoel: Geveerde Grammer Maximo Super-Comfort stoel + passagiersstoel
Spiegels: Elektrisch verstelbaar en verwarmd, incl. groothoek
Ecomode: Brandstofbesparende aandrijving
Cruise control met antistall functie
Aandrijving: Permanente vierwielaandrijving met vergrendelbare lengtedifferentieel voor vooras en tandem achterassen
Voor- en achterassen: Met drukbediend vergrendelbaar dwarsdifferentieel
Sturing: 6-wiel besturing + krabsturing (tandem deels krab)
Banden: Mitas 900/60 R42 SFT CHO 192 A8
Vooras: Hydraulisch geveerd met automatische nivellering en pendelbeweging
Tandem achteras: Mechanische pendelbeweging
Achterhef (3-punts, Cat 3): Dubbelwerkend met torsie-geveerde CAT 4 snelkoppelingen, actief gestuurd bodemvolgend
Heffing: 660 mm (max. ~1 m bij 900 banden)
Hefkracht: Max. 105 kN (10,5 ton)
Handmatige bediening van 3-punts aan spatbord
Automatisch vetsmeersysteem met 4 liter reservoir
Hydrauliek:
1 Closed-loop pomp: max. 267 l/min, 420 bar
2 LS-pompen: elk 170 l/min bij 200 bar
Hydraulische ventielen achter: 4 dubbel-/enkelwerkende ventielen vanuit cabine bedienbaar
Vrije retourleiding: ¾"
Achteruitrijalarm, achteruitrijcamera met LCD-kleurenscherm en geluid
Voorbereiding voor tweede camera achteraan
Telescoopsysteem voor kiepen van mesttank
2 zwaailampen op cabine
Verlichting:
LED-koplampen in bumper voor
2 LED-werklampen achter cabine
2 LED-werklampen onder cabine
4 LED-werklampen op dak cabine
Luchtinstallatie voor schoonblazen van cabine en koeler
Snelkoppeling voor lucht achteraan de trac
Brandblusser: 5 kg
Noodhulpset: inclusief zekeringen, sensoren, stekkers en O-ringen
Teleservice-licentie: 2 jaar op afstand (Vredo support login)
TPIS 7138-3 BANDENDRUKSYSTEEM (motorcompressor)
Motorcompressor: 850 l/min bij 4 bar, 1500 t/min
Voor standaard 900 banden (buitenbreedte 3,0 m)
Leidingen buitenom banden, afneembaar voor transport
In cabine bedienbaar, 2 standen: veld / weg
Bandendruk (voor- en achteras) zichtbaar op touchscreen
OPTIONEEL: TUV-uitvoering VT7138-3 (alleen Duitsland)
Aanpassingen volgens Duitse wegverkeerswetgeving
Noodbesturing via elektrisch-hydraulische pomp
Waarschuwingsborden voor/achter, kentekenhouder
Snelheidsaanduiding, wielkeggen
TUV-keuring 40 km/h incl. certificaat
ONDERSTEUNINGSAS VT7138-3
Nodig voor Duitse toelating bij werktuigen ≥30 m of bij aslast voor >11,5 ton
Verhoogd toelaatbaar totaalgewicht
EXTRA WERKVERLICHTING OP SPATBORDEN
2 extra LED-werklampen op spatborden achter cabine
GPS-OPTIE: TRIMBLE TMX/RTK
Trimble Autopilot RTK met TMX 2050-terminal
AG25 GNSS-antenne boven 3-puntsophanging
Volledig geintegreerd in besturing Trac
Krabsturing via GPS
Signalen: GPS + Glonass, EGNOS (0-30 cm), RTK (0-2 cm, excl. licentie)
Voorbereid op RTK via simkaart
RUITENWISSERS OP CABINE
Wissers op beide deuren, bediening in dakconsole
MESTTANK VT7138-3 - ZBV 32000Zs FLEXTANK
GVK tank met gelcoat en 5 klotswanden
Inhoud: 25 m3 + 7 m3 topzak = 32 m3 totaal
Hydraulisch kippend, eenvoudig te demonteren met Twist-Locks
Open beluchting, automatische pompschakeling
Mechanisch + elektronisch niveaumeting
Voorinstelbaar laadvolume via terminal
8″ 3-wegklep achteraan: laden/lossen/circuleren
LED-werklampen en camera + zwaailicht achteraan
Inspectieluik achter
VOORBEREIDING SWINGMAX BEMESTER (Vogelsang)
Steunen en transportbeugels zijkant
CAT 4 verlengde snelkoppelingen
4-punts verbinding met vaste constructie
Krabsturing mogelijk voor Trac (niet voor werktuig)
Verdeelbox met 2x 6″ snelkoppelingen
Elektro-hydraulische en softwareaanpassing
EXTRA WERKVERLICHTING OP TANK
2 extra LED-werklampen op achterzijde tank (links + rechts)
POMP-FILTEREENHEID PF12000
Complete unit voor op chassis
Vogelsang verdringerpomp VX186-520QD (12.000 l/min, hydrostatisch aangedreven)
Filter Vredo FT 6200 met gehard stalen binnenwerk, bediening vanuit cabine
10″ DN250 laadarm, zwenkbaar 135°
Automatische terugdraai voorziening
Variabel toerental bij laden
Besturing via multifunctionele joystick en terminal
6″ herlaadaansluiting vooraan
Automatisering laadarm
LED-verlichting en flexibele opstap
TELESCOOP HERLAADARM PF12000
Telescooparm 10″, uitschuifbaar tot 7,2 m vanaf vooras, hoogte 4 m
Met 10″ kogelkoppeling, 2 hydraulische cilinders
Luchtaangedreven afdichting, 4″ beluchtingsklep
OPTIE: CENTRIFUGAALPOMP IN PF12010
Bovenop standaard laadarm gemonteerd
Capaciteit tot 16.000 l/min
Hydrostatisch aangedreven tot 200 pk
Werkt samen met verdringerpomp via bypass
Inclusief beluchtingsklep