Parkway 2250

Power Engine: V1505-E2B-RAN.UK2, Vertical, water-cooled, 4-cycle diesel engine
V1505T-E2B-RAN.UK1, Vertical, water-cooled, 4-cycle Turbo diesel engine
Power: 25 kW (33.5 hp) @ 3000 rpm
Displacement: 1498 cc
Starting System: 12V electric start
Fuel Capacity: 51 litres (13.5 gal)
Drive train Traction Drive: On-demand cross-flow 4 wheel drive system, 2 wheel drive in transport mode. Direct coupled variable displacement
pump to 200cc/rev front, 160 cc/rev rear wheel motors
Cutting Unit Drive: Fixed displacement hydraulic motors.
Speed (maximum)
Cutting: Forward: 12 Km/h (7.5 mph) Reverse: 12 Km/h (7.5 mph)
Transport: Forward: 25 Km/h (15 mph) Reverse: 6.4 Km/h (4 mph)
Hydraulic Tank Capacity: 42 litres (11.1 gal)
Grade of hydraulic oil: ISO 46 Oil
Controls Starter key switch, throttle control lever, parking brake, cutting unit switch, individual cutting unit lift/lower control, weight transfer switch,
traction pedal, steering tilt control, horn, auto diff lock, hazard warning switch, lighting kit switches (where fitted), optional rotating beacon,
TSTTM (Tilt Safety Technology) option
Brakes Service: Positive Hydrostatic
Parking: Fail safe zero maintenance oil immersed wet disc brakes
Steering Hydrostatic powered steering to rear wheels
Tyres Front: 26 x 12-12 8pr
Rear: 20 x 10-08 04pr
Dimensions Transport Width: 1.60 m (63”)
Height: 1.50 m (59”) with ROPS folded
Length: 2.55 m (100.4”)
Weight 1355 Kg (including cylinders with ROPS, full tanks & 6 Knife fixed head cutting units)
Wheel Track: Front: 1.3 m (51”) Rear: 1.1 m (43”)
Wheel Base: 1.50 m (59”)
Cutting Units Type: Three hydraulically driven 762 mm (30”) W.O.C. Cylinders
Weight Transfer: Balance with hydraulic weight transfer
Cuttingh Unit Lift: Individual hydraulic lift/lower
Cutting Cyclinder: Magna 250 6-knife,254 mm (10”) Diameter, fixed head
Sport 200 8 knife, 197 mm (7.8”) diameter,floating head
Width of Cut: 2.15 m (84.6“)
Height of Cut: Fixed Head Magna 250 12.7 mm to 61 mm (0.5” to 2.4”)
Floating Head Sport Standard Blade: 12.7 mm to 35.7 mm (0.5” to 1.41”)
Thin Blade: 9 mm to 32 mm (0.35” to 1.26”)
Cutting Productivity: 2.3 hectares/h at 12 km/h with 6 knife fixed head units
2.3 hectares/h at 12 km/h with 8 knife floating head units
Rollers: Front - Sport 200 Full width 76 mm (3”) Diameter grooved roll
Rear - Magna 250 & Sport 200 Full width 76 mm (3”) Diameter solid roll
Cylinder Adjustment: Tool or hand wheel
Operator Operator Ear Noise Levels: 85.3 dB (A) Leq (98/37/EC)
Hand Arm Vibration Levels: 0.39 m/s2
Measured Sound Level: 101 dB(A) LWA